SAP Library - Find your answers

thanks for the reply, but i think i missed my point. The question is how to maintain the mic, when the first mic is dynamically changing
and the second value is not be calculated it shall be manually entered. so how to valuate the same?
i think now it is more clear.
Regards,
vamsi
On Fri, 19 Jun 2009 Burzis Muglai via sap-log-qm wrote :

Dear Vamsi,
You can use calculated characteristics in the control indicators of X2, X3
& X4,
Set the same formula as you have mentioned in the control indicatiors of
MIC in the inspection plan.
While results recording, enter the value of X1 and get the values of X2,X3
& X4 calculated.
With Regards,
Burzis Muglai
Mobile # 91 9426406735
"qm_ittool via sap-log-qm" Burzis J Muglai/India/IBM@IBMIN cc 06/19/2009 09:26 AM Subject
[sap-log-qm] Master inspection characterisitics Please respond to sap-log-qm@groups .ittoolbox.com

(Embedded image moved to file: pic04102.jpg)
Hi All, One scenario related to the MIC, I have got 4 mic's X1, X2, X3, X4. In the inspection plan i need to maintain the Limits of the above mic's. the lower limit values of the X2 = 2.5X1, X3=0.8X, X4= 2.0X, where the value of X1=X. How to map this ? does anybody has any clue related to the same or faced a similar situation like this. thanks in advance Regards,
vamsi


--
SAP PPQM Consultant
ZensarOBT Global
HYD
DISCLAIMER:
This email may contain confidential or privileged information for the intended recipient(s) and the views expressed in the same are not necessarily the views of Zensar Technologies Ltd. If you are not the intended recipient or have received this e-mail by error, its use is strictly prohibited, please delete the e-mail and notify the sender. Zensar Technologies Ltd. does not accept any liability for virus infected mails. __.____._